debug capture data physical target

This command defines the destination server for the captured packet file.

Syntax

debug capture data physical target ftp user <ftp username> password <ftp password> 
debug capture data physical target tftp
debug capture data physical target usb

Arguments	Description
ftp	Defines using an FTP server.
tftp	Sends the capture to a TFTP server.
usb	Saves the capture to USB storage.

Default

By default, capture is inactive.

Note:

The usb option is only applicable when a USB stick is connected to the device. This applies only to Mediant 5xx and Mediant 8xx devices.

Command Mode

Enable

Related Commands

Examples

The following example sets the destination for the captured packet file as a TFTP server.

# debug capture data physical target tftp